Legionella Analysis (MLC-2006 Potable Water Analysis Compliant)
The test kit contains everything required to perform a legionella analysis, including sample collection containers and disposable pipettes.
These tests are optimised for use with hot and cold water systems, whirlpool spas, showers, cooling towers and industrial water systems.
The test is simple to use and fast, with no interpretation required.
Results are easy to read and obtained within 25 minutes.
There are no chemicals to measure or handle.
The test allows immediate understanding and response to the water conditions.
Use can reduce risk of outbreaks and litigation.
Test volume 100µL
100 µL Exact volume disposable pipette provided
pH range 5-10
Sample temperature range 15-45°C (59-113 F)
Environmental operating range 15-40ºC (59-104 F)
Free chlorine concentration < 5ppm
Total Alkanlinity <1000 ppm
Total Hardness <1000 ppm
The product has been tested with a range of common biocides and
biodispersants used in Legionella control, at their normal maximum
operating concentration. Active ingredients tested include:
glutaraldehyde, didecyl-dimethyl-ammonium chloride, isolthazoles,
dibromonitrilopropionamide, ionic and non-ionic surfactants.
The test gives a false positive if used with polymeric biguanide or
Operator time <2 minutes
Development time 25 minutes
Shelf life 18 months from manufacture when stored at room
temperature (<30°C) in original packaging
|Information||After 10 minutes of non-use in measuring mode; after 1 hour of non-use in calibration mode|
|Brand Codes||Approve method for detecting the actionable point (100CFU/ml) of Legionella pneumophila|